Содержание
- Solved: Boot Device Not Found Error (Complete Guide)
- Why the Boot Device Not Found Error Occurs?
- How to Fix the Boot Device Not Found Error?
- Conclusion
- Top 7 Fixes for Boot Device Not Found Error Windows 10/8/7
- What does the “boot device not found” error mean?
- Factors that trigger the “boot device not found” found error
- Methods to Fix the “boot device not found” error
- Fix the “boot device not found” error message
- boot device not found error 3F0 решение проблемы
- Conclusion
- Top 4 Fixes for Boot Device Not Found Issue in Windows 10/8/7 [Partition Magic]
- No Boot Device Found Windows 7/8/10
- How to Fix HP Boot Device Not Found Windows 10/8/7
- Устранение проблемы boot device not found error 3F0. Hard Disk 3F0 Как исправить.
- Suggestion: Make a System Backup
- Bottom Line
- Boot Device Not Found FAQ
Note: System backup is only useful for fixing the issue of bootable device not found that is caused by software problems like system file damage and MBR corruption. If this issue is due to disk bad sectors, it is useless.
Solved: Boot Device Not Found Error (Complete Guide)
Summary: The ‘Boot Device Not Found’ error usually occurs when there is a problem with the system hard drive. Read this blog to learn about the causes behind this error. This blog also mentions various solutions to fix the Boot Device Not Found error.
- Why the Boot Device Not Found Error Occurs?
- How to Fix the Boot Device Not Found Error?
- Conclusion
The ‘Boot Device Not Found’ error occurs when there is an incorrect boot sequence in the BIOS setup or the system can’t detect the hard disk. Several HP and Lenovo users have reported about encountering this error under different circumstances with a different set of measures. When this issue occurs, any of the following error messages may appear on the screen:
- Boot device not found. Please install an operating system on your hard disk
- No boot device available
- HP boot device not found
- Boot device not found – hard disk (3F0)
- No bootable device found – insert boot disk and press any key
Why the Boot Device Not Found Error Occurs?
The error occurs when your system hard drive finds difficulty in supporting the boot process. The operating system loads into RAM during the booting process. To complete the process, BIOS takes charge and access certain system files from the internal hard drive. However, when the system can’t detect or access the hard disk, you may find the ‘Boot Device Not Found’ error popping up on your screen. There could be several reasons behind this error, such as:
- Hard drive connection issue
- Corrupt hard drive partitions
- Damaged hard drive
- Incorrect boot sequence in the BIOS
- Damaged MBR (Master Boot Record)
How to Fix the Boot Device Not Found Error?
You can try the following troubleshooting methods to fix the Windows 10 boot device not found error.
#1 Perform Hard Reset
When you perform a hard reset, it rebuilds the connection between the hardware and BIOS. Several Windows users have reported that performing a hard reset has helped them fixing this error. Here’s how to perform a hard reset:
- Turn off your PC and remove the AC adapter from it.
- Make sure there is no peripheral device connected now to your PC.
- After that, press the Power button for about 15 seconds to drain out the residual charge.
- Now, press the Power button again to reboot your system.
- Once the Startup menu appears, use arrow keys to navigate to Start Windows Normally and hit Enter.
- Connect all the needed devices and see if the error is resolved.
#2 Reset Your Hard Drive
You can try resetting the hard drive to fix the error. To do so, follow the given steps:
- Turn off your PC by pressing the Power button and unplug the power cable.
- Now, disconnect the hard drive and reconnect again.
- Reboot your PC to check if it works seamlessly without showing any error.
Scenario 1: Now see if you can boot your device normally
If you can boot your device normally, follow the given methods:
#3 Run CHKDSK Command to Fix Bad Sectors on Hard Drive
Bad sectors on the hard drive may occur due to corruption, physical damage to the drive, etc. You can try running the CHKDSK command to fix the corruption and bad sectors on the hard drive. Follow the given steps:
- Type Command Prompt in Windows Search Box and run it as an administrator.
- In the Command Prompt Window, type CHKDSK /f/r/D: and press Enter. (Replace D: with your hard drive letter.
- Wait for a while. Once done, close the Command Prompt window and check if the problem is solved.
Caution: The CHKDSK command with the F and R attribute can fix the corrupted hard drive. However, this command scans and marks down the bad sectors on the hard drive and prevents Windows from reading and storing data on these bad sectors, eventually causing data loss.
#4 Reset BIOS Default Settings
Your system may be configured to boot from an unbootable disk. You can try fixing the boot device not found 3F0 error by resetting the BIOS default settings. Follow the given steps:
- Reboot your system and immediately press the F10 key to enter the BIOS setup menu.
- Now, press F9 on the BIOS setup menu to load and restore the BIOS setup default settings.
- Once it is loaded, press F10 to Save and Exit.
- After that, select Yes. When it says Exit Saving Changes, press Enter.
- Then, follow the instructions given on the screen to restart your system.
Scenario 2: If you can’t boot the system normally
#5 Boot PC with Bootable Media and Rebuild MBR
If you’re having trouble booting your PC normally, boot your PC with bootable media and then rebuild the MBR (Master Boot Record). Here are the steps:
- Create installation media for Windows and boot your PC using the media.
- Next, select the language and other preferences and click ‘Next on the initial setup screen.
- Next, click Repair your computer.
- In the Command Prompt window, type the following commands and press Enter.
BOOTREC /FIXMBR
BOOTREC /FIXBOOT
BOOTREC /rebuildbcd
- Once the process is complete, close the window.
- Reboot your system and check if it’s working fine.
#6 Reset your PC
If none of the above methods work, you’ll be left with only one option – resetting your PC. To do so, restart your PC with bootable installation media and follow the given steps:
- Enter Automatic Repair environment and click Advanced options.
- On the Choose an Option screen, click Troubleshoot.
- Next, click Reset this PC.
- Now, choose an option – Keep my files or Remove everything.
Note: To make this method work, it is recommended to choose Remove everything.
- On the next prompt, click Just remove your files and then click Next.
- A warning message will appear. Click Next > Reset.
- When prompted, click Continue.
- Once the process is finished, close the window and reboot your system.
Resetting your PC with the ‘Remove everything’ option will cause data loss. However, you can use a powerful data recovery software, such as Stellar Data Recovery Professional to recover the data after resetting your Windows PC. It is a DIY tool that efficiently restores any data from all types of storage devices.
Conclusion
Among several errors, you may find the Boot Device Not Found error quite troublesome as it occurs randomly and doesn’t show any stop code or bug check value. We’ve provided some methods in this blog to fix the problem. A few methods such as running the CHKDSK command and resetting your PC may cause data loss. But you can retrieve the data by using Stellar Data Recovery Professional software.
Moreover, if still the error message ‘Boot Device Not Found, Please install an operating system on your hard disk’ pops up, contact a reliable hard drive recovery service provider.
About The Author
Mansi Verma is a Senior Technology Writer at Stellar®. She is a Tech enthusiast, holding over 8 years of experience in Data Recovery, IoT, Artificial Intelligence, and the Robotics technology domain. She loves researching and providing DIY solutions to solve Windows technical issues. In her spare time, she likes reading novels, and poetry.
She also enjoys Travelling, Rafting, Trekking, etc.
Best Selling Products
Stellar Data Recovery Premium
Stellar Data Recovery Premium for Window
Stellar Data Recovery Technician
Stellar Data Recovery Technician intelli
Stellar Data Recovery Toolkit
Stellar Data Recovery Toolkit is an adva
BitRaser File Eraser
BitRaser File Eraser is a 100% secure so
Top 7 Fixes for Boot Device Not Found Error Windows 10/8/7
The “Boot device not found” is one of the Windows errors that is caused because of a hardware failure. This is a very serious problem but the fixes are quite simple. You will find this article of extreme help if you ever have to go through this trouble.
Contents show
What does the “boot device not found” error mean?
The “hard drive boot device, not found error” is an issue that is caused when the Operating System’s boot-up process is not supported by the hard disk.
When this process is initiated, the OS is booted up into the RAM (Random Access Memory) with the help of the BIOS. This BIOS feature uses some files from the default bootable device, which is your hard disk. If this hard disk can not be accessed by the BIOS, this will throw the “boot device not found” error message at you.
Error Messages that you can see
If your boot device can not be found, these are some of the error messages that you can see before the device boots up-
- No bootable disk – insert boot disk and press any key
- No boot device is available
- No Boot Device Found. Press any key to reboot the machine.
- Boot device not found. Please install an operating system on your hard disk. Hard Disk (3FO)
Factors that trigger the “boot device not found” found error
Several reasons can cause the Boot device not found error on Windows computers. It is important that we know and understand the cause of the issue before actually trying to fix it.
These are what could be causing the hard drive, error code 3FO, and error message Boot device not found the issue on your operating system:
1. The Hard drive is physically damaged
If the hard disk is damaged physically, there is very little chance for the Operating System (OS) to detect the storage unit. This is a very unlikely scenario and it is important to handle hardware with care.
2. The Hard drive is connected loosely
If your hard drive is not attached properly to the computer motherboard, it is highly likely for it to not be detected and hereby bring up the hard disk error.
3. The SATA/IDE wiring is not properly connected or damaged
The SATA/IDE is an interface that connects the motherboard with the Hard Disk Drives (HDD) or the Solid State Drives (SSD). This requires short wiring. If these cables are wrongly arranged or broken this may cause a hard disk connection problem or disk failure.
4. Malware Infestation
Malware and viruses can be responsible for a lot of issues on your computer. Besides the well-known crashes and data loss, the boot device not found error can also be caused by malware.
5. The MBR or boot sector is damaged
The Master Boot Record (MBR) has the needed files that are important for the operating system. This may be corrupted and cause hard drive partition issues. If this is your case, the files will still be on the hard disk but they will not be detected.
6. The Booting Sequence is not correct
A Boot sequence is a structure of storage units that the system boot process needs as the operating system loads on the PC. This order can be rearranged to start up with a bootable device, which is not apt if it does not have an OS in it or if it is not present.
Methods to Fix the “boot device not found” error
You may have been thinking that you will have to contact data recovery professionals to fix this issue. This can be easily fixed with no assistance, on your own.
The following methods can help fix hard disks with caution:
- Reset your laptop the hard way
- Reinstall the OS again
- Restore BIOS setup default settings configuration
- Run the HP Hardware Diagnostics utility
- Remove and Reattach the hard drive
- Repair the OS through the Windows Recovery Environment
- Check the PC Boot order
Fix the “boot device not found” error message
1. Reset your laptop the hard way
A hard reset of your device can fix a lot of issues that can come up when the settings configuration is changed. This can give you a new link between the motherboard software BIOS and the hard disk and thus, fix the Boot device not found the issue on your laptop.
These are your steps to perform a hard reset:
- Switch off the laptop and remove all attached accessories, like a USB flash drive or a docking station, and power cord (AC adapter) from the ports.
- Run a power cycle on the laptop by pressing the power button.
This will flush out all the charge in the device.
- Set it aside for around 10 minutes and boot the laptop again.
- You will see the Startup menu open, as the operating system starts up.
- Use the up and down arrow keys on your keyboard to choose the Start Windows Normally option.
- Hit the Enter key to proceed.
2. Reset the PC again
Reinstalling the Operating System can help put everything in the computer back to default. You may have to compromise some files. A simple reset can help you fix “hard disk not found” error on your system.
This is the procedure to reset your PC:
boot device not found error 3F0 решение проблемы
- Click on the Windows icon on the leftmost corner of the taskbar. You can, alternatively, press the Windows key on the keyboard. Open Settings by clicking on the gear icon.
- Open the Updates & Security settings and select the Recovery option from the left.
- From the Reset this PC category, choose the Get Started option.
- You have to choose between keeping the files and deleting them over the reset.
- After you follow all the steps that the OS asks you to do, wait for a while as the computer system gets reset.
- Reinitialize the system and set it up.
It is important to perform a data backup to a USB drive or any storage device with a large storage capacity or cloud storage over the internet.
3. Restore BIOS setup default settings configuration
The BIOS settings may have changed. Wrong settings may not detect bootable devices. Restore BIOS settings on your computer back to default for the boot drive to be detected again.
- Switch on the laptop or desktop computer. Before it can completely boot up, tap the F10 key to bring up the BIOS setup screen. This may differ for different motherboards. You may have to press the F11 or Delete keys to bring up the BIOS menu.
- Press the F9 key to reset all the settings back to default in the BIOS setup menu.
- It takes a few seconds to load. Wait for it and press F10 again.
- Select Yes. When the Exit Saving Changes option is highlighted, hit Enter to keep the new changes.
- Do as instructed by the wizard and restart the computer, after you finish everything.
4. Run the HP PC Hardware Diagnostics utility
This method is exclusive to your HP laptop. There have been reports of HP laptops not being able to detect the boot device. The HP hardware diagnostics tool is a feature that is used in HP computers to detect hardware-related issues.
This is how to detect issues with HP laptop Hardware Diagnostics:
- Start Windows on your laptop and tap the Esc key multiple times till you see the Startup menu.
- Push the F2 key to bring up the HP Hardware Diagnostics.
- Choose the Components Tests option from the interface.
- Follow this path:
Hard Drive settings > Quick Test option > Run Once
- Some users may have two or more drives. They have to choose Test all Hard Drives.
- This operation takes a while. Once it is complete, you will get the results displayed.
- You can try the Extensive Test option if the issue does not go away.
5. Remove and Reattach the hard drive
Removing and connecting the hard drive is not an easy thing to do. This is something you will have to leave to a technical professional.
If you want to do it on your own, this is the correct way to do it:
- Turn off the system and take the power cable out.
- Open the case and remove the hard disk carefully after removing all the cables that connect the motherboard and the hard drive.
- It is recommended that you clean it with a soft, clean cloth before you place it back inside, with caution.
- Reboot the computer and the problem should be gone.
6. Repair the Operating System through the Windows Recovery Environment
Your OS may have some system files or important folders that can be corrupted or lost. The absence of these files can cause the bootable device to not be detected by the PC.
You can fix a boot device not found through the Startup Repair tool in the Windows operating system.
These are the steps to do so:
- Download the OS installation media from the Microsoft download site.
- Install this onto a CD/DVD or a USB drive.
- Connect this CD/DVD or USB, which is now an Installation tool, to your PC and turn it on.
- Launch Command Prompt while the installation takes place.
- The next steps might differ on the basis of the OS version.
- If you have Windows 7, choose Startup Repair from the System Recovery Options section.
- For Windows 8 and Windows 10 users, follow this path:
Repair your Computer menu > Troubleshoot settings > Advanced options
If you had Windows 8, click on Automatic Repair and if you have Windows 10, choose Startup Repair, in order to proceed with the repair process.
Once these steps are complete, you should no longer be able to see the Hard disk error code 3FO issue.
7. Check the PC Boot order
The first boot device for the system is the main hard drive. If you replace a hard drive or transfer the OS to a different bootable hard disk, you may have forgotten to change the boot sequence accordingly and this wrong boot order may be causing the “No boot device found” issue.
These are the steps to fix the incorrect boot sequence:
- Restart the computer and press the F9, F10, or Delete keys depending on the motherboard designers to launch the BIOS menu.
- Go to the boot tab and you can change the boot order here.
- The hard drive with the OS has to be placed on top with the help of the arrow keys and the Enter key.
- After changing it, press F10 to save and exit the interface.
Conclusion
The “No bootable device found” is an important issue, that has to be rectified immediately, in order to use the computer. However, this issue can be fixed without the help of a professional. It is wise to work on this with caution because improper care while handling hardware directly, can damage the components. If you are willing to fix it on your own, the contents of this article are what you need.
Top 4 Fixes for Boot Device Not Found Issue in Windows 10/8/7 [Partition Magic]
Does your HP, Dell, Lenovo laptop or desktop have the «boot device not found» error? This post will provide some general solutions to troubleshoot this issue for Windows 10/8/7 users, as well as a method to protect your PC from system corruption.
No Boot Device Found Windows 7/8/10
A lot of issues could often happen to a computer, such as a system breakdown, black or blue screen, system file damage, unbootable OS, etc. These issues usually follow a specific error message.
Among these problems, “boot device not detected” is very common. It always occurs during the process of booting the operating system Windows 10/8/7.
There are various error messages:
- “No bootable device – insert boot disk and press any key”
- “Boot Device Not Found. Please install an operating system on your hard disk. Hard Disk (3F0)”
- “No Boot Device Found. Press any key to reboot the machine”
- “No boot device is available”
All these messages indicate the operating system not being able to find the bootable hard disk or the boot sector of the hard drive. This will prevent your computer from booting up, which could certainly make work and life inconvenient.
HP (HP Pavilion G6), Dell, Lenovo and Acer laptops and desktops running Windows 10/8/7 tend to encounter the issue of «boot device no found» more than others.
A variety of reasons could cause this issue: wrong boot order in the BIOS, corrupted or died bootable disk, damaged MBR or boot sectors on the bootable disk, hard disk connection problem, outside attacks like virus or malware, etc.
If the no bootable device error occurs to your computer, what should you do to fix it? This post will walk you through the full solutions in Windows 10/8/7.
How to Fix HP Boot Device Not Found Windows 10/8/7
In general, there are four methods to repair this problem according to different factors, so please try them according to your actual situation in Windows 10/8/7.
Solution 1: Test and Fix Hard Disk
First, check whether your hard disk is in a good state. The issue of bootable device not found is usually caused by the damaged or faulty hard disk.
How to do this work in Windows 10/8/7? We recommend a reliable and excellent third-party tool – MiniTool Partition Wizard.
As a partition and disk management software, it is designed to perform quality disks and partitions managing operations. This includes resizing partition, doing conversion between NTFS and FAT32, doing conversion between GPT and MBR, migrating OS to SSD, rebuilding MBR, copying disk/partition, etc.
This tool’s Bootable Media feature manages your disks and partitions when the OS is problematic with the no operating system error or system fails to boot.
Before you do anything:
A disk surface test requires you to buy MiniTool Partition Wizard Professional Edition because Free Edition doesn’t support the Bootable Media feature.
Useful articles:
- How to Build Boot CD/DVD Discs and Boot Flash Drive with Bootable Media Builder?
- How to Boot from Burned MiniTool Bootable CD/DVD Discs or USB Flash Drive?
Step 1: Build a bootable disc and use it to boot your computer. You will be directed to an interface. Click MiniTool Partition Wizard to launch this tool.
Step 2: In the main interface of MiniTool Partition Wizard, select the target disk, and click Surface Test in the left pane.
Устранение проблемы boot device not found error 3F0. Hard Disk 3F0 Как исправить.
Step 3: Click Start Now to start a disk test. During the process, MiniTool Partition Wizard will mark bad sector red , and mark disk block without error green .
A: Shield Bad Sectors
If your hard disk has some bad blocks, the important thing is that you need to shield them to get rid of the boot device not found error on your HP, Dell or Lenovo laptop/desktop. Unfortunately, MiniTool Partition Wizard doesn’t have such a feature.
However, Windows built-in diagnostic tool CHKDSK can be used to shield bad blocks. For more information, click this post — What to Do If I Find Bad Sectors on Hard Drive in Windows 10/8/7. This can shield bad sectors and solve the «no boot device available» issue.
B: Copy Disk/Partition for Data Backup
After a disk test finds many bad sectors, for your data security, you should back up the important files on the target hard disk. Here MiniTool Partition Wizard Professional Edition could be used to do this after performing the CHKDSK operation.
You can use two features for the backup:
Copy Disk clones the entire disk data to a new target hard drive, which should be larger than the used disk space of the source disk.
Copy Partition is recommended if your important files are saved to a partition.
Please choose one to make a backup according to your situation.
Tip: MiniTool ShadowMaker, the professional PC backup software, can also help you to back up files with its Backup or Clone Disk feature. This post The Best Way to Back up Laptop to External Hard Drive in Windows may be helpful for you.
Solution 2: Repair MBR or Boot Sector
MBR is a part of computer boot hard disk that contains executable code to function as a loader for the operating system. It is used to boot the PC successfully. Having it damaged will cause the bootable device not found error and stop the PC from booting up.
Therefore, it is important to repair the master boot record or boot sector. In this case, MiniTool Partition Wizard Bootable Media can also be used.
Step 1: Boot PC from the bootable disc you have built. Then in the main interface of MiniTool Partition Wizard, select the target hard disk and click Rebuild MBR from the Check Disk menu.
Step 2: Click Apply to finish fixing the boot sector and solve the boot device not found error.
Tip: You can also use the Command Prompt tool. Please prepare a Windows installation and run this tool in the Windows Recovery Environment. Then use the command tool – bootrect.exe to fix MBR. This post — Step-by-Step Guide to Repair and Fix MBR Windows 7/8/8.1/10 may be useful to you.
If you are interested in MiniTool Partition Wizard Bootable Edition, please purchase its Professional Edition and use its Bootable Media feature to make a bootable disc to boot your computer. Then rebuild MBR to fix the no boot device found issue.
Solution 3: Check and Modify Your PC Boot Order
You might have forgotten to change the boot order after replacing a hard drive or migrating the OS to SSD. If the incorrect hard drive is set as the first device item, Windows cannot find boot device.
In order to remove the bootable device not found issue successfully, it is necessary to double-check your computer has the correct boot order; if not, modify it to boot system from the correct device. To do so in Windows 10/8/7, follow the steps below.
Step 1: Restart your computer, and then type a specific key according to the manufacturer of your device to enter the BIOS.
Note: The way to go to PC BIOS is different for different computers in different Windows operating system. So please press a key according to your situations. Refer to this post — How to Enter BIOS Windows 10/8/7 (HP/Asus/Dell/Lenovo, any PC) for help.
Step 2: Then under the BIOS Setup Utility main interface, click Boot to check the boot order. If the computer isn’t set to boot from the correct hard disk, please modify the bootable disk as the first boot device by pressing ↑↓ keys.
Step 3: Press F10 to save this change.
When rebooting this computer, the “boot device is not found” error will be removed and it should run properly. If the problem persists, please try the next solution.
Solution 4: Fix Operating System
Your operating system files or folders could be somehow deleted, lost, or damaged accidentally, which might lead to the issue of no boot device detected.
Follow the following steps to fix these:
- Prepare a Windows installation disc, CD/DVD or USB flash drive and connect it to your PC.
- During the installation process, launch Command Prompt.
In Windows 7, under the System Recovery Options tab, click Startup Repair.
In Windows 8 and Windows 10, click Repair your computer, then select Troubleshoot > Advanced options > Automatic Repair (Windows 8) or Startup Repair (Windows 10).
This should fix some problems that prevent Windows from loading or starting.
Suggestion: Make a System Backup
After fixing the boot device not available problem, the operating system should be in a healthy state. This is a perfect chance for OS migration for backup. In order to ensure the system runs normally, when a system becomes unbootable again, OS backup is necessary to recover OS to the previous point.
To back up your Windows 10/8/7, you can try MiniTool Partition Wizard to migrate OS to SSD/HD when the system is running successfully. Download it for free and try.
In addition, MiniTool has a piece of professional backup software for Windows 10/8/7 — MiniTool ShadowMaker. With simple clicks, this tool can help you back up files, disk, partition, and the operating system. It also supports automatic backup, differential backup, and incremental backup.
Moreover, it also provides a Media Builder to build a bootable disc or USB drive for when a system has issues regarding booting like boot device not found.
Here, back up your OS and create a bootable disc or drive with MiniTool ShadowMaker Trial Edition.
Step 1: Launch MiniTool ShadowMaker Trial Edition on your HP, Dell or Lenovo laptop or desktop.
Step 2: Under the Backup tab, you can see that the backup source (system partitions) and storage path have already been specified. Click Back up Now to execute the backup task.
Note: System backup is only useful for fixing the issue of bootable device not found that is caused by software problems like system file damage and MBR corruption. If this issue is due to disk bad sectors, it is useless.
Bottom Line
At the end of the post, let’s try out the solutions above to get rid of the issue of boot device not found on your laptops or desktops like HP, Lenovo or Dell. Also, download MiniTool ShadowMaker to back up your Windows in case of any system corruption.
If you have any questions about no boot device found fix or about the MiniTool software, you are welcome to leave a comment below or email us via [email protected] . Thanks for reading!
Boot Device Not Found FAQ
How do I fix boot device not found?
The methods are various and they are:
- Test and fix hard disk
- Repair MBR or boot sector
- Check and modify your PC boot order
- Fix operating system via Startup Repair
What does no boot device available mean?
If the PC screen says “no boot device available” when turning the PC on, it means that the PC fails to find a Windows installation disc or a hard drive that has an installed operating system.
How do I boot up in safe mode?
If you are running Windows 10, there are many methods you can try to boot to safe mode, for example, use Settings, Start menu, System Configuration, etc. This post — How to Start Windows 10 in Safe Mode (While Booting) describes each way in detail.
How do you reset the BIOS?
To reset the BIOS, there are three steps you should do. For more details, refer to this post — How to Reset BIOS/CMOS in Windows 10.
- Open BIOS Menu
- Find the Setup Defaults Option
- Reset BIOS
Похожие статьи
-
Измените значение ряда характеристик БИОСа. Перейдите в БИОС, изберите вкладку «System Configuration» — «Boot option». Измените значение функции…
-
Step 6: After you finish the tasks, you can stop the PXE service by clicking Stop on the host computer. You asked: What is network stack in BIOS? What is…
-
Boot device not found что делать hp
Потом меняем значение параметра «Legacy Support» из «Disabled» на «Enabled». В функции «Legacy boot order» избираем, с чего мы желаем загружаться (как…