Kernel power 41 63 windows 11

Содержание

• Kernel-Power Event ID 41 Task 63 Error in Windows 11/10
• Kernel-Power Event ID 41 Task 63 error
  • 1] Initial checklist
  • 2] Run Power Troubleshooter
  • 3] Update device drivers
  • 4] Change Sleep and Hard Disk power settings
• How To Fix Kernel Power Error 41 In Windows [Solved]
  • 5] Use OCCT to test for PSU issues (applies to Desktop PCs)
  • 6] Check your hardware
  • 7] Update BIOS (if applicable)
  • What causes Kernel-Power error 41?
  • What is a Kernel error in Windows?
  • Can RAM cause Kernel-Power 41?
  • What is Kernel Power Manager?
• Критическая ошибка Kernel-Power событие 41 (категория 63)
• Описание ошибки Kernel-Power
• Fix & Diagnose Fault Code Event Kernel 41 The System Has Rebooted Without Cleanly Shutting Down
• Причины ошибки
• Как исправить Kernel Power событие 41
• Видео
• Kernel Power 41(63)
  • Похожие статьи

1. Проверьте целостность имеющихся в системе кабелей питания, а также плотность их подключениях к соответствующим разъёмам ПК;
2. Проверьте работоспособность вашего блока питания. Попробуйте сменить ваш блок питания, и протестируйте систему уже с другим источником питания;
3. Попробуйте подключить компьютер к фильтру питанию напрямую, без источника бесперебойного питания (UPS), проследите, будет ли возникать данная ошибка вновь;
4. Отсоедините от ПК внешние устройства (обычно подключенные через разъёмы USB), и протестируйте стабильность работы вашего компьютера;
5. Перейдите в БИОС и сбросьте его настройки до заводских значений;

Kernel-Power Event ID 41 Task 63 Error in Windows 11/10

There are reported cases by some PC users whereby during normal usage while their Windows 11 or Windows 10 computer is plugged in or running on battery, the computer’s screen instantly turns black or white with a scratching noise in the background & no errors or alarm, then the computer freezes forcing the user to hard reboot, and on boot, the Kernel-Power Event ID 41 Task 63 error is logged in Event Viewer. This post offers the most suitable solution to this issue.

The error description reads as follows:

The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

Kernel-Power Event ID 41 Task 63 error

1. Initial checklist
2. Run Power Troubleshooter
3. Update device drivers
4. Change Sleep and Hard Disk power settings
5. Use OCCT to test for PSU issues (applies to Desktop PCs)
6. Check your hardware
7. Update BIOS (if applicable)

Let’s look at the description of the process as it relates to each of the listed solutions.

1] Initial checklist

• Disable Fast Startup. Fast Startup feature, enabled by default, is a hybrid sleep mode that enables your computer to boot extremely quickly. The implication is, that your computer doesn’t completely shut down, but rather combines a full shutdown with hibernation mode, saving the last machine state to enable you to resume using your PC straight away. However, unlike full hibernation mode, when you return, it is like starting the machine from scratch. There are no windows open, and your previous applications are not open, and so on. Although, a neat feature, sometimes it could be the cause of certain problems. So, you can disable Fast Startup and see if that helps with this particular issue.
• Run CHKDSK and SFC scan. Next up, you can run CHKDSK to verify the integrity of your Windows 11/10 file system. If the procedure doesn’t find any faults, you can run the System File Checker (SFC) scan to check for missing or corrupt Windows system files. The difference between the former and the latter is the scope of the scan, where CHKDSK scans your entire drive for errors, whereas SFC scans your Windows system files specifically. However, before you run the SFC scan command, it is best to run the DISM scan so that SFC doesn’t pull corrupt system files to repair system files if needed from the WinSxS folder which is the system files source cache.

2] Run Power Troubleshooter

Given that the error in view on your Windows 11/10 computer is power-related, your next attempt to troubleshoot the issue is to run the Power Troubleshooter. The automated wizard will detect and recommend appropriate steps you can take to fix any underlying power issues that might have triggered the event.

To run the Power Troubleshooter on your Windows 11 device, do the following:

To run the Power Troubleshooter on your Windows 10 PC, do the following:

3] Update device drivers

• You can manually update drivers via Device Manager if you have already downloaded the .inf or .sys file for the driver.
• You can update the driver via Command Prompt.
• You can as well get the driver updates in the Optional Updates section under Windows Update.
• You may also download the latest version of the driver from the manufacturer’s website.
• You can automatically update your drivers using any of the free Driver Update software.

4] Change Sleep and Hard Disk power settings

The error in hand can occur on your Windows 11/10 computer due to the power settings of your hard disk most especially in this case. So, to resolve the issue, you need to adjust or change your hard disk power settings by following these steps:

How To Fix Kernel Power Error 41 In Windows [Solved]

• Press Windows Key + S, type power, and choose Power & sleep settings from the menu.
• When the Power Options window opens, click on Additional power settings.
• Find your current plan. If Power Plans are missing, see this guide on how to restore them.
• Click on Change plan settings for your active power plan.
• On the Edit Plan Settings applet that opens, click on Change advanced power settings.
• In the Power Options panel that appears, scroll to the Hard disk section and click to expand.
• Next, click on Turn off hard disk after and set it to Never.
• Next. click the Sleep section to expand.
• Select Sleep after and also set it to Never.
• Click Apply >OK to save the changes.
• Restart PC.

5] Use OCCT to test for PSU issues (applies to Desktop PCs)

As reported by some affected mostly desktop PC users, this troubleshooting step identified that a faulty PSU was the culprit. You can check your PSU using a multimeter or a dedicated PSU testing tool. However, it’s known that the majority of software-based PSU checking tools cannot deliver an accurate reading on whether your PSU is working correctly. That said, if you do want to attempt a PSU software test, you can use OCCT (OverClock Checking Tool), a free CPU/GPU/PSU stress testing tool. OCCT stress tests your CPU, GPU, and motherboard, and in the process, can discover any faults with your power supply unit.

• Save any work and close any other open programs on your system.
• Open OCCT.
• Under Test Configuration, select Power.
• Set the Instruction Set to Auto.
• When ready, click the Play bar in OCCT to begin the stress test.

Once the test completes, OCCT will output a log highlighting any potential PSU errors so you can take any necessary actions.

6] Check your hardware

This error can also be related to your hardware, and if you’ve encountered a random restart on your Windows 11/10 computer, it might be due to a hardware problem. Some affected PC users reported that replacing their motherboard or power supply unit resolved the issue for them. Some others also reported that their issue was caused due to RAM and GPU, but after reseating their RAM module and the graphics card the issue was resolved – in the event this didn’t resolve the issue probably because the hardware in question is faulty, you will have to replace them, but you can run the Hardware and Devices Troubleshooter to know what you are up against.

You can also perform a Hardware Clean Boot to troubleshoot to identify and isolate the device that might be responsible for the issue you’re currently facing. Once you identify any problematic device, you may have to update the driver for the devices or take any other necessary action.

7] Update BIOS (if applicable)

Before you proceed with this solution after you have exhausted all other avenues, first check for updates and install any available bits on your Windows 11/10 device. After your PC is updated or your system is already updated, continue using your PC normally, and if the issue in highlight reoccurs then you may have to update the BIOS. However, keep in mind that BIOS updates only fix hardware issues (which can be detected by running the Hardware and Devices Troubleshooter as described above) and not software issues unless that software is directly related to the hardware.

• If you own a Dell laptop you can head over to Dell.com, or you could use Dell Update Utility.
• ASUS users can download the MyASUS BIOS update utility from the Microsoft Store.
• ACER users can go here. Enter your Serial Number/SNID or search for your product by Model, select BIOS/Firmware, and click the Download link for the file you want to download.
• Lenovo users can use the Lenovo System Update Tool.
• HP users can use the bundled HP Support Assistant.

I hope this post helps you!

What causes Kernel-Power error 41?

The Kernel-Power 41 error is generated by Windows 10 when the system reboots without cleanly shutting down first. It means that your system wasn’t able to go through the routine shutdown procedure and instead had something else cause a crash, loss of power, or restart.

What is a Kernel error in Windows?

Kernel Security Check Failure is not a virus in itself, it is an error message that Windows 10 displays on the screen when certain data files are corrupted. The root cause of data corruption may indeed be malware and virus infections, incompatible settings, memory issues, incorrect Registry changes, and more.

Can RAM cause Kernel-Power 41?

Faulty RAM or memory errors may also cause Kernel-Power Error 41 BSOD. Some users have reported that the issue was caused due to faulty RAM. You can run the Memory Diagnostic Tool to check problems with it. To run Windows Memory Diagnostic tool, press Windows Key+R, type mdsched.exe into the Run dialog that appears, and press Enter. You’ll need to reboot your computer to perform the test.

What is Kernel Power Manager?

The Windows Kernel-mode power manager manages the orderly change in power status for all devices that support power state changes. This is often done through a complex stack of devices controlling other devices.

Критическая ошибка Kernel-Power событие 41 (категория 63)

Некоторые из пользователей ПК могут столкнуться с ошибкой Kernel-Power событие 41 (категория 63), при возникновении которой компьютер обычно зависает, никак не реагируя на клавишные нажатия. В довольно редких случаях данная ошибка также может комплектоваться появлением BSoD (синего экрана смерти), после чего требуется полная перезагрузка вашего ПК. В данном материале я расскажу, в чём суть и причины данной ошибки, и какие способы необходимо выполнить для её исправления.

Описание ошибки Kernel-Power

Как следует из текста самой ошибки, обычно она имеет аппаратную природу, и наиболее часто связана с проблемами в питании (Power) вашего компьютера. Программные ошибки в работе операционной системы вызывают ошибку Kernel-Power событие 41 значительно реже.

Обычно сообщение об ошибке Kernel-Power появляется тогда, когда аппаратные компоненты ПК рапортуют о потере питания или сбоях в работе системы питания, что обычно приводит к перезагрузке операционной системы.

Также сообщение об указанной ошибке возникает, когда что-либо помешало ОС Виндовс выполнить корректное выключение персонального компьютера.

Fix & Diagnose Fault Code Event Kernel 41 The System Has Rebooted Without Cleanly Shutting Down

Причины ошибки

Конкретные же причины ошибки могут быть следующими:

• Проблемы в работе блока питания вашего ПК (в частности, скачки напряжения);
• Физическое повреждение различных кабелей питания ПК;
• Нестабильная работа источника бесперебойного питания (UPS);
• Некорректно работающие планки памяти;
• Некорректная работа подключаемых к ПК внешних устройств (внешние жёсткие диски, ЮСБ-накопители и так далее);
• Действие разнообразного софта для разгона ПК (оверклокинг);
• Одновременная установка в ПК двух звуковых карт;
• Устаревшие драйвера к компонентам компьютера (в частности, к сетевым картам);
• Перегрев системы (в частности, из-за того, что система охлаждения компьютера забита пылью);
• Устаревшая версия БИОС;
• Действие антивирусных программ.

Как исправить Kernel Power событие 41

Для избавления от ошибки Kernel Power 41 рекомендую выполнить следующее:

1. Проверьте целостность имеющихся в системе кабелей питания, а также плотность их подключениях к соответствующим разъёмам ПК;
2. Проверьте работоспособность вашего блока питания. Попробуйте сменить ваш блок питания, и протестируйте систему уже с другим источником питания;
3. Попробуйте подключить компьютер к фильтру питанию напрямую, без источника бесперебойного питания (UPS), проследите, будет ли возникать данная ошибка вновь;
4. Отсоедините от ПК внешние устройства (обычно подключенные через разъёмы USB), и протестируйте стабильность работы вашего компьютера;
5. Перейдите в БИОС и сбросьте его настройки до заводских значений;

System - Provider [ Name] Microsoft-Windows-Kernel-Power [ Guid] EventID 41 Version 3 Level 1 Task 63 Opcode 0 Keywords 0x8000000000000002 - TimeCreated [ SystemTime] 25 Августа 2021T10:03:38.647941100Z EventRecordID 1807 Correlation - Execution [ ProcessID] 4 [ ThreadID] 8 Channel System Computer G580 - Security [ UserID] S-1-5-18 - EventData BugcheckCode 0 BugcheckParameter1 0x0 BugcheckParameter2 0x0 BugcheckParameter3 0x0 BugcheckParameter4 0x0 SleepInProgress 0 PowerButtonTimestamp 0 BootAppStatus 0 Хотя вот здесь, впервые на моей памяти, хоть какие-то цифры BootAppStatus - System - Provider [ Name] Microsoft-Windows-Kernel-Power [ Guid] EventID 41 Version 3 Level 1 Task 63 Opcode 0 Keywords 0x8000000000000002 - TimeCreated [ SystemTime] 31 Августа 2021T04:48:06.386922600Z EventRecordID 2759 Correlation - Execution [ ProcessID] 4 [ ThreadID] 8 Channel System Computer G580 - Security [ UserID] S-1-5-18 - EventData BugcheckCode 0 BugcheckParameter1 0x0 BugcheckParameter2 0x0 BugcheckParameter3 0x0 BugcheckParameter4 0x0 SleepInProgress 5 PowerButtonTimestamp 0 BootAppStatus 3221225684