No boot device acer

Содержание

При включении ноутбука Acer выходит «No Bootable Device» (см. фото), в чём проблема? и что делать.
«No Bootable Device, Hit any key.» Cannot access BIOS. Won’t boot from DVD. USB not a boot option.
Ошибка No Bootable Device. Устраняем ошибку при загрузке ноутбука Acer Aspire.
8 Solutions: No Boot Device Acer in Windows 11, 10, 8, 7
My Acer computer says no bootable device found
What causes no bootable device in Acer?
7 Methods to fix no boot device (Acer) in Windows effectively
Не включается ноутбук. No bootable device. Как решить проблему?Check cable connection
No Bootable Device на ноутбуке — что делать?
Final words
- Free Partition Manager
- Still Need Help?
  - Похожие статьи

1. Download the freeware and install it on a working Windows computer. Then connect an empty USB to that PC as well.

При включении ноутбука Acer выходит «No Bootable Device» (см. фото), в чём проблема? и что делать.

“Boot Device”, который компьютер не может найти – это носитель данных, такой же, как CD или DVD диск, жесткий диск или флешка, на которой установлены какие-либо программы, в том числе операционная система. Если компьютер не может найти это устройство, на которой хранится операционная система, то на экране появляется то самое сообщение. Для нормальной загрузки операционной системы необходимо правильное функционирование памяти компьютера. Теперь рассмотрим основные случаи, которые могут приводить к появлению этой ошибки.

Повреждение файлов операционной системы

Наиболее вероятная причина ошибки – это повреждение установленной операционной системы из-за атаки вируса, случайного удаления необходимых системных файлов или архивация системного диска.

Что делать: единственный способ исправить данную проблему – вставить в привод диск с операционной системой и полностью переустановить ее. Все данные на системном диске будут удалены, но локальные диски с обычными файлами останутся в целости. Кстати, переустанавливая операционную систему, можно установить новую версию ОС и полностью обновить программное обеспечение для улучшенной работы компьютера.

Отсоединение жесткого диска

В более редких случаях проблема может случиться из-за того, что BIOS не может определить жесткий диск как носитель операционной системы, так как он отсоединен от материнской платы. Это может произойти вследствие падения или удара компьютера. Чтобы проверить, действительно ли это является причиной, нужно найти в BIOS (нажать соответствующую кнопку – F1 или F2) во время включения компьютера.

Что делать: В этом случае нужно открыть корпус компьютера и проверить надежность подсоединения кабеля жесткого диска к материнской плате. Если кабель держится плохо, то его нужно хорошенько закрепить. С ноутбуком нужно сделать то же самое. Если срок годности компьютера или ноутбука еще не истек, то не следует решать эту проблему самостоятельно, а обратиться к специалистам.

Повреждение жесткого диска

Еще одной причиной проблемы может быть физическое повреждение жесткого диска или возникновение на нем трещин. Скачки электричества, излишнее количество пыли или удары компьютера могут привести к поломке жесткого диска. Так как жесткий диск поврежден, BIOS не может его найти и загрузить операционную систему.

Что делать: В этом случае нужно заменить жесткий диск. Поврежденный жесткий диск можно диагностировать в сервисном центре и при возможности отремонтировать, но лучше приобрести новый.

Если вам кажется, что ни одна из перечисленных причин не соответствует вашей проблеме, то стоит обратиться к специалистам. Более того, не стоит открывать корпус компьютера и «копаться» в деталях, если срок годности еще не истек, иначе вы можете сломать то, что еще работает. При действительном сроке годности лучше всего обратиться в сервисный центр, где проблему исправят специалисты.

PentaxУченик (148) 5 лет назад

В моём случае решилось всё просто! Зашел в биос, переключил на IDE и сохранился. Оказалась разряженная батарея подпитки биос, заменил. По умолчанию в биос всегда стоит режим UEFI, следовательно проблема была в батарейке))))

«No Bootable Device, Hit any key.» Cannot access BIOS. Won’t boot from DVD. USB not a boot option.

How can I either get into the BIOS or boot from a Live CD or Windows install disk?

Here’s the background info:

Laptop: Acer TravelMate P273-MG-6608

Actions leading up to the problem:

I tried to encrypt the HDD using BitLocker.

Upon reboot I get the error message, «No Bootable Device, Hit any key.»

When I hit a key, I get a boot menu that lists the HDD, DVD drive, and Network Boot as options.

Booting from either of the HDD (of course) or DVD does not work.

The disks I’ve tried:

Acer System Restore Disk

Win 7 Restore Disk

Ubuntu Install (Saw elsewhere on this forum that worked for someone.)

Methods I’ve tried to access the BIOS:

Powering on the laptop while holding down the F2 key.

Same while tapping the F2 key about once per second.

Same with Delete key.

Same with Alt+F10

Each method was tried several times with no success.

Removed the HDD and connected it to a working computer. Doing this, I was able to recover all my files.

The drive settings appeared to all be correct. Drive letter C:, file format NTFS, primary partition, the recover partition was there as well.

Re-inserted the HDD into the original laptop — no success.

Formatted the primary partition on the HDD, put it in the laptop, same results.

Formatted the entire HDD, put in the laptop, same results.

Ошибка No Bootable Device. Устраняем ошибку при загрузке ноутбука Acer Aspire.

What I see as options:

1. Format the HDD outside of Windows, say using Hiren’s Boot CD and Gparted.

2. Doing that and imaging the drive with a Windows 8.1 or 7 ISO, if I can find one.

3. If I can get into the BIOS, I should be able to get the laptop to boot from something. Or turn UEFI off, which I suspect is part of the issue.

Any ideas on how I can get into the BIOS or get the laptop to boot from the HDD or a disk?

8 Solutions: No Boot Device Acer in Windows 11, 10, 8, 7

When you meet the «No boot device» error in Acer computer, read this post and learn 8 effective methods to fix no bootable device problem in Windows PC.

By Emily

My Acer computer says no bootable device found

«I have an Acer Aspire V3-371 Series laptop here and it cannot boot as it cannot find any Bootable device. I originally tried to reinstall Windows, that did not work. Now I am out of ideas what it could be and how to fix it.» — from DPReview forums

«When I turned on my computer it went to a black screen stating, No bootable device — insert boot disk and press any key. I do not have a boot disk and am not sure what to do next.» — from windows10forums

Do you receive the error that says no bootable device found on your Acer desktop or laptop? If that is the case, keep reading to find out the reasons and solutions for no bootable device Acer in Windows 11, 10, 8, 8.1 and 7.

What causes no bootable device in Acer?

What does the error message mean actually? It means that your Acer computer does not find or detect a hard drive, solid state drive or other bootable drives to load the operating system. And this issue can be caused by the following factors:

▶ Incorrect boot order

▶ Partition not set as active

▶ Bad sectors on the primary hard drive

▶ Hard disk failure or corrupted MBR

▶ Corrupted system files

▶ Boot partition lost

▶ Some other unknown reasons

7 Methods to fix no boot device (Acer) in Windows effectively

In order to troubleshoot «no bootable device Acer» issue, you can try the following 7 methods, which are proven to be workable by some users. These methods can also apply to no boot device Dell, HP, or other branded computers.

Method 1. Disconnect all USB peripherals
Method 2. Check for loose cables
Method 3. Set right hard drive as the first boot device
Method 4. Reset primary partition as active
Method 5. Run SFC command to repair corrupted boot files
Method 6. Fix damaged MBR
Method 7. Rebuild MBR directly without Windows CD
Method 8. Recover lost partition

▌ Method 1. Disconnect all USB peripherals

In some cases, the “no boot device” error can be caused by your USB devices. So, you can try to disconnect all your USB peripherals from your computer, including the USB keyboard and mouse because some users report they can also trigger this problem.

If the USB peripherals are the culprit of the “no boot device” issue in Acer computer, try to replug them one by one until you find out the exact one that makes your computer fail to boot, and replace it with a new one.

▌ Method 2. Check for loose cables

If your components are not connected properly, you might receive the error message during Windows startup. To fix this problem, you should power down your computer and open your computer case. And check whether all SATA cables are tightly or correctly connected to the motherboard and hard drives. Then restart your computer to see if the issue is resolved.

▌ Method 3. Set right hard drive as the first boot device

If you insert an unbootable disk or CD in the Acer computer and set it as a boot device, then you will encounter «no bootable device» problem. Therefore, to ensure the computer start smoothly, you need to change the boot order and set the disk that loads the operating system as the bootable device.

Не включается ноутбук. No bootable device. Как решить проблему?Check cable connection

1. Hold the power-button for 5 seconds to power off the device. Then power on the system. As soon as the first logo screen appears, immediately press the F2 key, or the DEL key if you have a desktop, to enter the BIOS.

2. Press the arrow key on your keyboard to get «Boot» tab, and change the boot order settings to make Hard Drive as first boot device.

3. Follow the instruction given to you in the BIOS utility to navigate to «Exit» tab.

4. Locate and choose the «Exit Saving Changes» option to save the changes you made to the boot order.

No Bootable Device на ноутбуке — что делать?

5. Follow the prompts to restart your computer.

If the issue is still unsolved, please check out the next solution.

▌ Method 4. Reset primary partition as active

If the primary partition is not set as «active», then the no bootable device in Acer will occur. So please reset your primary partition as active using the Diskpart and running some commands.

1. Insert the Windows installation media into your computer and boot from it.

2. Select the language and region, and then click «Repair your computer».

3. In a Windows 10 (or Windows 8.1, Windows 8) installation media, select «Troubleshoot» and then «Command Prompt». In a Windows 7 installation media, in «System Recovery Options», select the first item and Windows 7 as the operating system, click «Next» and then «Command Prompt».

4. In Command Prompt, type the following command and hit Enter.

▪diskpart

▪select disk 0: 0 reprents the system disk number

▪list partition 1: 1 reprents the system partition number

▪active

Now, the system partition is set to active. Type «exit» and press Enter to exit diskpart and close Command Prompt. Then restart your computer and see if the error persists.

▌ Method 5. Run SFC command to repair corrupted boot files

The corrupted boot files on the Acer computers can be another important reason for the error being explained. In this case, you can run SFC command to check and repair corrupted system files.

Launch Command Prompt using Windows installation CD and run the following command:

▪sfc /scannow /offbootdir=c: /offwindir=c:windows

If those two commands can’t fix the problem, you might have to use DISM scan instead. To do that, just execute “DISM /Online /Cleanup-Image /RestoreHealth” command.

If it doesn’t work,either, try using the following commands:

▪Dism /Image:C:offline /Cleanup-Image /RestoreHealth /Source:c:testmountwindows

▪Dism /Online /Cleanup-Image /RestoreHealth /Source:c:testmountwindows /LimitAccess

These commands will check for file corruption and fix any corrupted files on your hard drive that prevent Windows from booting up successfully.

▌ Method 6. Fix damaged MBR

The MBR is a boot sector of your hard disk which contains vital information about the partitions on your hard disk and loads the OS. If it is damaged, you won’t be able to boot up Windows and receive some error messages such as “no boot device”. So you can fix MBR to check if the boot problem can be repaired.

To do this, you need to access Command Prompt as well. And execute the below command in given sequence.

▪bootrec /fixmbr

▪bootrec /fixboot

▪bootrec /scanos

▪bootrec /rebuildbcd

If those commands do not work, run commands below:

▪bcdedit /export C:BCD_Backup

▪c:

▪cd boot

▪attrib bcd -s -h -r

▪ren c:bootbcd bcd.old

▪bootrec /RebuildBcd

After running these commands, exit Command Prompt and restart your computer to check if your problem is resolved.

Besides, you can also run the command «chkdsk c: /f /r /x» in the command prompt windows to check and fix bad sectors on the system hard drive.

▌ Method 7. Rebuild MBR directly without Windows CD

From above, we can get that most no boot device Acer fixes require the usage of Windows installation CD. So what if you don’t have one? Thus, you can switch to AOMEI Partition Assistant Standard. It is a free but powerful disk/partition management tool. With it, you can directly rebuild MBR or check system drive for errors without using Windows installation CD. All you need is to create a bootable USB drive via this freeware and rebuild MBR in WinPE environment. Much easier! Below are detailed steps:

1. Download the freeware and install it on a working Windows computer. Then connect an empty USB to that PC as well.

Secure Download

2. Run AOMEI Partition Assistant Standard. Click “Make Bootable Media Wizard” on the left panel and follow the prompts to create a bootable USB.

Note: The bootable USB will contain installed AOMEI Partition Assistant.

3. Insert the bootable USB into the Acer computer with no bootable device error. Boot it from the USB by changing boot order in BIOS.

4. You’ll see loaded AOMEI Partition Assistant once login. Right click the system disk and select «Rebuild MBR».

5. Choose a proper MBR type for the current OS you are using.

6. Back to the main interface, click «Apply» and “Proceed” to start rebuilding the MBR.

If you need to check system hard drive for errors and fix them, you can right-click the system partition and select “Advanced”> “Check Partition”. Then select the first way to check and fix errors on this partition.

▌ Method 8. Recover lost boot partition

If your system partition is deleted accidentally, the no bootable device error message might pop out as well. For this case, you can upgrade to AOMEI Partition Assistant Professional to recover deleted boot partitions.

Step 1. Create a bootable media and boot Acer from it (like we do in the last method).

Step 2. Click on «All Tools» >»Partition Recovery Wizard».

Step 3. Select the disk that contains the lost boot partition and causes «no boot device» issue in Acer.

Step 4. Choose a method to search for the lost boot partition.

Step 5. Choose the lost partition and click on «Proceed» to recover the missing boot partition.

Final words

After walking through this guide for no bootable device Acer problem, now you should be able to deal with such issue effectively. If you need to fix a similar problem in Windows Server operating system, you can try AOMEI Partition Assistant Server.

Free Partition Manager

Resize and Move Partition
System/Disk Clone
Convert MBR/GPT Disk
Check & Fix Disk Errors

Still Need Help?

Have your problem been solved? If not, please input query in the search box below.