The file is corrupt

Содержание

How to Fix Corrupted Files Easily on Windows PC
Why Do Files Become Corrupted?
How to Fix Corrupted Files?
Precautions to Avoid Losing Files
Ошибка “The file is possibly corrupt” при включении компьютера
Что означает ошибка?
Причины и методы устранения
PS Vita «The File Is Corrupt» Error! (Simple Fix)
Вывод
[FIXED] The File or Directory is Corrupted and Unreadable
How to Delete Corrupted files in Windows!
What Causes ‘the File or Directory is Corrupted and Unreadable’ Issue?
What Are the Best Ways to Fix ‘the File or Directory is Corrupted and Unreadable’ Issue?
Conclusion

If you are bothered with the PFN_LIST_CORRUPT or a file too large for the destination file system, here are the top solutions for you.

How to Fix Corrupted Files Easily on Windows PC

We usually have plenty of files on our computers, and there is no specialty about it. Although we can afford to lose some of those files, there are many essential files for us.

What if you find that one of those important files is corrupted and cannot be opened? Does that mean that the respective file is gone forever? Should you give up on that? Probably not and let’s discuss how to fix corrupted files.

PS: should you have problems with the file or directory being corrupted and unreadable, click to fix them now.

Why Do Files Become Corrupted?

Before learning how to fix corrupted files, it is essential to figure out the reasons behind such a scenario. Let’s discuss them here in this section.

Files can corrupt due to power outages associated with your computer.
Your computer has crashed when you save the file.
There are some bad sectors associated with your hard drive or the respective storage device used.
Some malware infections can lead to making files corrupted and unopenable.
Your computer has gone through a bad update.
The computer has experienced an unexpected shutdown.

How to Fix Corrupted Files?

Now that we have a general idea about how the files can get corrupted. Let’s refer to the solutions.

01. Recover Corrupted Files using Tenorshare 4DDiG

As we realize, the best way to fix corrupted files in your Windows computer is through Tenorshare 4DDiG. It is true that this is not the only solution to fix corrupted files. However, for obvious reasons, we strongly suggest 4DDiG as the best tool to accomplish that task. To call it the best tool, there are various reasons.

The most noticeable benefit associated with 4DDiG is that it repairs files without causing any data loss. As we have found, most of the other file repair tools can cause data loss.

In addition to repairing the files, 4DDiG can recover files that are lost due to any reason. For instance, it can recover files that are accidentally deleted or lost due to formatting, virus attacks, etc.

Main Features Associated with 4DDiG

Let’s take a quick look at the main features associated with 4DDiG.

It can perform deep scans to find corrupted files in the Windows operating system.
It can preview all the files in the system before recovering.
4DDiG can fix more than 1000 types of files that are corrupted and inaccessible.
It supports all the files such as videos, documents, images, excel, zip, audio, etc.
This tool can recover corrupted files from various media ranging from hard drives to memory cards.
It assures the safety of the data you are dealing with.
4DDiG doesn’t overwrite the existing data on your computer.
The recovery rate of this software is over 98% which is a very impressive rate.
Convenient user interface with loads of features.

How to Fix Corrupted Files using Tenorshare 4DDiG

Now, let’s learn how to fix corrupted files using this powerful tool.

Step 1: Please download and launch 4DDiG on your computer. Select the drive where your corrupted files are located and tap on Scan to proceed.

Step 2: The tool will do scanning on your selected drive to find and repair the corrupted files. After the scanning, you can choose files to preview before the corrupted file recovery.

Step 3: Now, please select target files and click the Recover button to save them to a safe location.

Please note that you should store the recovered files in a different drive or location. Choosing the same location to save the files may corrupt the files once again. So, it is always better to choose a different location.

02. How to Fix Corrupted Files through Windows Built-in Tool?

If you don’t want to try the 4DDiG data recovery tool, you can try Window’s built-in tool as well. The main advantage associated with this method is that it doesn’t cost any money.

As the first step, you should open the ‘Computer’ icon and perform a right-click on the respective hard drive. ‘Respective’ means the hard drive that comprises corrupted files you intend to recover. Then, choose the option called ‘Properties.’
Now, on the separately opened ‘Properties’ Window, you can see several options to select. You should choose the option called ‘Tools’ and then tap on the option called ‘Check Now’ as well.
You can now go to the option labeled ‘Scan for and attempt recovery of bad sectors.’ Then, choose the option labeled ‘Automatically fix the file system errors.’ Both of these options appear in the form of checkboxes. Then, you should tap on the option called ‘Start.’

How to Fix Corrupted Files in Windows 10

In Windows 10, you should choose the option called ‘This PC.’ Then, you should perform a right-click on the hard drive in which the corrupted files are saved. After that, you should choose the option called ‘Properties.’
You can now choose the option called ‘Tools’ and then tap on ‘Check.’
Once the reviewing of scan results is completed, you should tap on the option called ‘Scan.’ Then, you should choose when the files are to be repaired. Once done, be patient with the results.

03. Choose Command Prompt to Fix Corrupted Files

This is another free method that can recover corrupted files. Moreover, this method works in Windows 7, 8, and 10.

For Windows 7

Type CMD in the search box, and you will see it appear in the menu. Perform a right-click on this option and choose the option called ‘Run as Administrator.’
As the second step, you should type the text ‘ sfc/scannow ‘ and press ‘ Enter ‘ in the CMD interface. If there are corrupted files, you should see that Windows locates and repair the files.

For Windows 8 and 10

Open up the command-line interface, as we mentioned in the previous method. If you don’t find any issues, just close the command prompt. If you find issues, you may proceed to the next step.
Now, in the command prompt, you should type the text ‘ DISM/Online/Cleanup-Image/RestoreHealth ‘. Then, press ‘ Enter ‘ on your keyboard. Wait for a while and restart the PC.

That’s exactly how to recover the corrupted files on your computer. With the assistance of any of the above methods, you can try to recover the files that are damaged. However, the first method we have mentioned (4DDiG) shows greater success compared to the other methods.

4DDiG is a specially developed software just for the purpose of recovering corrupted and lost files. It works in all Windows operating systems (Windows 7, 8, and 10) with an impressive success rate.

Also, if you have a large number of corrupted files to be recovered, 4DDiG is the best option. Apart from recovering corrupted files, this impressive software can recover even deleted files.

The best thing about it is that you can recover files without causing data loss. You may use the trial version of Tenorshare 4DDiG first and get an idea about the functionality.

Precautions to Avoid Losing Files

It is true that we deal with plenty of files every day on your computers. A single mistake can cause data loss, so it is important to know the solutions. One of the main precautionary actions you should perform is to create regular backups.

Be sure that you create backups of your existing data on a regular basis and store them separately. In that case, you can recover the lost files even if something happens to the hard drive.

In addition to that, you should use a powerful antivirus program on your computer and keep it updated. Such an approach will prevent losing files due to malware attacks. Also, be sure to shut down your computer properly without unplugging it while it is functioning. Don’t forget to use a UPS if you are using a PC.

Well, that’s our article about how to fix corrupted files on a Windows platform. Please let us know if you have further questions.

Ошибка “The file is possibly corrupt” при включении компьютера

С данной ошибкой можно столкнуться как на компьютере, так и на ноутбуке. В большинстве случаев она возникает при включении пк, а конкретно в момент начала загрузки операционной системы. Некие сталкиваются с ней во время установки операционной системы.

В данной статье мы поведаем о причинах возникновения ошибки “The file is possibly corrupt. The file header checksum does not match the computed checksum”, также дадим практическое управление, которое поможет в домашних критериях без помощи других убрать эту делему.

Что означает ошибка?

Для того, чтоб с этим разобраться не воспрепядствовало бы выяснить перевод текста ошибки. Он звучит так: Может быть, файл поврежден. Контрольная сумма заголовка файла не совпадает с вычисленной контрольной суммой.

Из написанного выше можно прийти к выводу, что имеются задачи с каким – то из загрузочных файлов операционной системы из-за которого она не может быть загружена. В это время, когда файлы, нужные для загрузки Windows, считываются с жесткого диска в оперативку и происходит сбой.

Причины и методы устранения

Одной из главных обстоятельств возникновения ошибки “The file is possibly corrupt. The file header checksum does not match the computed checksum” является неправильно работающая оперативка.

Чтоб это проверить и поправить для вас необходимо выключить и разобрать системный блок. Дальше достаем все модули оперативки и протираем на их контакты обыденным ластиком.

Манипуляции с ОЗУ

Если модулей памяти несколько, то пробуем попеременно ставить их в различные разъемы по отдельности, всякий раз включая компьютер. Так можно отыскать сбойным модуль, перебрав их по отдельности.

Очистка контактов ОЗУ

Если же модуль оперативки всего один, то протираем на нем контакты и пробуем вставлять в различные слоты на материнской плате. Не исключено, что неувязка не с модулем, а с разъемом.

Также очень лучше протестировать память программкой MemTest86+.

Проверка оперативки программкой Memtest

Если же манипуляции с оперативной памятью не дали результатов, то дальше стоит проверить жесткий диск на наличие BAD блоков.

Тест поверхности диска в Victoria

Также попытайтесь переключить собственный загрузочный жесткий диск на другой SATA разъем и лучше другим шлейфом (взять для проверки его можно от DVD привода).

Кабели жесткого диска в компьютере

В случае, когда ошибка “The file is possibly corrupt” возникает при попытке установить операционную систему, а манипуляции с оперативной памятью и жестким диском не дали результатов, стоит испытать поменять установочный диск либо флешку, скачав другой загрузочный образ Windows.

PS Vita «The File Is Corrupt» Error! (Simple Fix)

Вывод

Почти всегда ошибка “The file is possibly corrupt. The file header checksum does not match the computed checksum” появляется из-за проблемного модуля оперативки либо жесткого диска с огромным количеством BAD блоков. Еще пореже предпосылкой является плохой установочный диск/ загрузочный образ, скачанный с веба либо проблемный SATA шлейф, соединяющий жесткий диск с материнской платой.

Наилучшая благодарность создателю — репост к для себя на страницу:

[FIXED] The File or Directory is Corrupted and Unreadable

Have you come across the issue called ‘The file or directory is corrupted and unreadable’ and become frustrated? Don’t worry. We will show you how to overcome this issue for good and start using your hard drive again.

How to Delete Corrupted files in Windows!

If you don’t know yet, The file or directory is corrupted, and an unreadable issue occurs with external hard drives. This is not a very new issue. When you use an external hard drive, there is a possibility of experiencing such an issue sooner or later.

In fact, this error emerges whenever Windows OS cannot read the external hard drive or access it. If you wonder what might cause this issue, there is no shortage of reasons behind it.

In other words, ‘The file or directory is corrupted and unreadable’ can occur for various reasons. However, the good news is that there are several fixes to address this issue successfully.

What Causes ‘the File or Directory is Corrupted and Unreadable’ Issue?

Before we look into the fixes, it is better to get a clear idea of the causes. Such an approach will give you a better idea about what you are dealing with. Also, it helps you to address the issue with a better understanding. In a nutshell, you know what you do.

So, below is a list of common reasons that cause the ‘The file or directory is corrupted and unreadable’ issue.

Corrupted FAT or MFT partitions on your hard drive.
Your external hard drive is infected by dangerous malware such as a virus. As a result, the malware can corrupt the partitions created in the hard drive. In addition to that, such malware can cause damage to all or some of the files stored.
The respective external hard drive has physical damage or malfunction.
The troublesome external hard drive was not removed properly from the computer. As a result, partitions and files stored in the same hard drive can corrupt.
There is something wrong (physical defect, malfunction) with the USB port of the computer. As a result, the computer will not be able to read the data on the hard drive properly.

If you are bothered with the PFN_LIST_CORRUPT or a file too large for the destination file system, here are the top solutions for you.

What Are the Best Ways to Fix ‘the File or Directory is Corrupted and Unreadable’ Issue?

Now, in this section of our guide, we will explain the best ways of addressing this issue. In fact, we basically talk about two methods in this section.

Besides, click here to find out how to fix corrupted files, as well as how to fix the cannot open volume for Direct Access error.

01. Use the CHKDSK tool to Overcome the Issue

When you come across the issue ‘The file or directory is corrupted and unreadable,’ don’t panic. Instead, think of the fact that there is a built-in tool to address this issue. This tool is called CHKDSK (Disk Check Utility). Through this tool, you will be able to see if the disk has some fixable issues.

To launch this tool, you will have to enter the command CHKDSK. To enter this command, you should simply use the command prompt. Through this single line of command, you will be able to scan the respective drive.

Moreover, it will fix a variety of issues, such as bad sectors, directory errors, lost clusters, etc.

Mentioned Below Are the Instructions You Should Follow to Fix This Issue.

First of all, you should launch the command prompt using the start menu of the computer. If not, you can easily enter the text CMD on the ‘Run’ box and hit Enter. Make sure that you run this process in administrator mode.
When the command prompt is opened, type the text CHKDSK /f X: in the command prompt. Please note that the letter X should be replaced with the drive letter of the potentially erroneous disk.

After executing the command, you will see that Windows starts a process to scan the drive. Then, after the scan, it will display the results. In this result, you will be able to see the potential errors.

By the way, click here for the full Raid 0 vs. Raid 1 comparison.

02. Format the Faulty Device without Affecting the Existing Data

The next solution we offer is formatting the respective hard drive and overcoming the issue. One would say that formatting the hard disk will erase all the data in it. If you do it regularly, yes, you will lose all the data on the hard drive.

However, a tool like Tenorshare 4DDiG can format hard disks without affecting the existing data. Isn’t that good news? Mentioned below are the steps you should take in order to format a hard drive without losing data.

Recover the Files using Tenorshare 4DDiG

In fact, formatting your hard drive means getting rid of all the data, including valuable files. So, the trick here is to use professional data recovery software (Tenorshare 4DDiG).

With such a tool, you will be able to avoid the frustration of losing all the files prior to formatting. We highly recommend using Tenorshare 4DDiG because of obvious reasons. This tool allows you to recover files using a single recovery session without any hassle.

PS: also, you will find out how to get rid of the error of the GPT protective partition.

Main Features Associated with Tenorshare 4DDiG

In this section of our article, we list the most notable features associated with 4DDiG.

This software is capable of recovering all types of files using a couple of clicks.-It comes with an exceptionally friendly user interface to allow users better convenience and achieve better productivity.
4DDiG works with more than 1000 file formats, including images, documents, videos, audio, etc.
It can recover lost data from your external hard drives faster and easier.
In addition to external hard drives, it supports internal hard drives, USB flash drives, memory cards, cameras, etc.
This software allows you to recover files effortlessly regardless of how you lost them. For instance, it can recover intentionally deleted files and files lost due to a system crash. Also, it can recover files that are damaged due to a physical defect, malware attack, or any other reason.

How to Overcome ‘The File or Directory is Corrupted and Unreadable’ Issue using 4DDiG

Now, let’s take a look at the steps to follow in order to resolve this issue.

Phase 01: File Recovery

Download and launch Tenorshare 4DDiG on your computer, and connect your affected USB drive to it. Then you will see below, including Drives, Devices, and Standard Position sections. Now, you should select the USB drive in which you dropped your data and click the Start button to proceed.

The tool scans your targeted drive all over for lost data immediately. Once you find your lost files, you can pause the scanning process.

Tenorshare 4DDiG can let you preview and retrieve various file types, including videos, photos, audio and document files, etc. Please just select and preview your desired files, and then click Recover to retrieve them from your drive.

Once you select the distinct location to save the recovered files. The task is completed. Congratulations!

Phase 02: Format a drive

01. Now that you have recovered the files from your hard disk, you can proceed to format.

02. In fact, you don’t need to use any third-party tool to format your external hard drive. It can be done using two official methods provided by Windows itself. To do this, you can choose either Windows Explorer or CMD.

We strongly recommend that you format the external hard drive through Windows Explorer. That is because it is faster and more convenient, even if you are a novice user.

03. Mentioned below are the instructions to format your external hard drive through Windows Explorer.

Go to ‘My Computer’ or ‘This PC’ depending on the operating system you use.
Then, navigate to the external hard drive that needs to be formatted and rectified.
Right-click on the respective device and then go to the option called ‘Format.’
Now, you should choose the file system. In addition to that, you should choose the option called ‘Quick Format,’ which is located under the ‘Format’ options.

Then, click on the option labeled ‘Start.’

Conclusion

Now, that is how to address the error ‘The file or directory is corrupted and unreadable.’

As we have mentioned, there are basically two methods to address this issue. If you use the second option (format the disk), make sure that you use Tenorshare 4DDiG. It will help you format the disk without causing data loss.